 |
Chipless RFID tag
What is chipless RFID? A chipless RFID tag (also known as RF fibers) is one that does not make use of any integrated circuit technology to store information. The tag uses fibers or materials that reflect a portion of the reader's signal back; the unique return signal can be used as an identifier.
The fibers are shaped in different ways; thin threads, fine wires or even labels or laminates. At volume, they range in cost from ten cents to twenty-five cents per unit.
Chipless RFID tags can be used in many different environments than RFID tags with electronic circuitry. They tend to work over a wider temperature range; these tags also are less sensitive to RF interference.
Chipless tags are sometimes used in anti-counterfeiting with documents. However, since the tags cannot transmit a unique serial number, they are less usable in the supply chain.
(go to RFID articles)
Index of related articles:
Active Tag (Active RFID Tag)
Amplitude Modulation (AM)
Antenna (RFID Tag Antenna)
Anti-collision
Back scatter (RFID back scatter)
Bi-directional
Contactless smart card
Chipless RFID tag
Contactless Credit Cards
Closed Systems (or Closed Loop Systems)
Code plate (RFID code plate)
Continuous Wave (CM)
Electromagnetic Interference (EMI)
Electronic Article Surveillance (EAS)
Electronic Product Code (EPC)
Error Correcting Code (ECC)
Error Correcting Mode
Error Correcting Protocol
Excite
Factory Programming
Field Programming
Frequency Modulation (FM)
Frequency Shift Keyed Modulation (FSKM)
Frequency Hopping
Harvest
Inductive Coupling
Modulation
Passive RFID Tag (or Passive Tag)
Phase Modulation (PM)
Pulse Duration
RF Fibers
RFID Reader
RFID Tag Collision
RFID tag
Smart label (RFID Smart Label)
RFID Reader Collision
Smart cards
Transponder for RFID
